EH-35 / EH-50 PrefeedersStandard Products
EH-35 / EH-50 Horizontal Discharge
The EH-35 and EH-50 horizontal discharge, elevating prefeeders are designed to handle medium-to-large sized parts. Using a modular, plastic, cleated chain to vertically transport parts up, then move them horizontally, this prefeeder allows the discharge to be closer to the bowl when reaching over existing equipment, but allowing for a gentle release of parts into an unscrambler bowl, eliminating the potential scuffing or scraping of parts. A heavy duty variable speed motor helps to ensure proper product metering. Note: Controllers and mechanical level sensors are not supplied with the unit.
|Hopper Capacity (EH-35/EH-50)||35-50 cu.ft./991-1416 liters|
- Standard Features
- Stainless steel construction
- Modular plastic chain
- Hopper clean-out door
- Available Options
- Elevator extensions*
- Hopper extensions for 50 cubic foot capacity
- Continuous welded hopper seams (EH-35/EH-50)
- Washdown motor
- Elevator and hopper covers
|A||Overall Width||72.00″||1828.8 mm|
|B||Overall Length||117.62″||2987.5 mm|
|C||Modular Chain Width||17.72″||450.1 mm|
|D||Hopper Load Height – EH-35||44.37″||1127.0 mm|
|D||Hopper Load Height – EH-50||50.07″||1271.8 mm|
|E||Discharge Height||76.46″||1942.1 mm|
|F||Overall Height||93.64″||2378.5 mm|
Note: It is strongly recommended that the frame of the prefeeder be reinforced and/or additionally supported for elevator extensions of 36″ or greater.
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.