Specialty Feeders and Unscramblers

Standard Products

FRS-60 Centrifugal Feeder


Product Overview

Shibuya Hoppmann’s standard FRS-60 Centrifugal Feeder is specifically designed to feed a wide range of large bottles and parts. The delivery rate varies from moderate to high speed depending on part characteristics. The FRS-60 centrifugal feeder is engineered to interface with Shibuya Hoppmann prefeeders, accumulating conveyors, assembly systems and other downstream equipment. Note: Tooling is not included with this unit.

FRS-60 Centrifugal Feeder
Part Number RS60XXXASA
Motor Style AC
Motor Voltage 208-230 / 460V
Horsepower 3 / 4hp
Total Equipment Weight 2500lbs. / 1134kg
  • Standard Features
  • All stainless steel exterior construction
  • Air clutch
  • Teflon Hardcoat Anodized aluminmum bowl predrilled for scallop mounting
  • FRS-60 Centrifugal Feeder Back up ring
  • Polycarbonate safety covers
  • Available Options
  • Urethane scallop kit
  • Washdown motor
  • NEMA 1 encased controller
FRS-60 Centrifugal Feeder Specifications
Product Specifications ANSI Metric
A Overall Width at Exit Zone 85.00″ 2159.0 mm
B Overall Width 82.00″ 2083.0 mm
C Overall Height 66.00″ ± 5″ 1676.0 ± 127 mm
D Discharge Height 40.00″ ± 5″ 1016.0 ± 127 mm
E Bowl Inside Diameter 51.79″ 1315.0 mm
F Rim Width 3.61″ 91.7 mm
G Scallop Length 12.00″ 305.0 mm
Required Accessories:
FRS Series Scallop Kit (both styles) – URTHCAST64

Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.

FRS-60-Technical Data Sheet