| Symptom | Possible Cause | Solution |
|---|---|---|
| Bowl does not turn | Part Jammed in Feeder | Verify the electric supply to the elevator |
| Part Jammed in Feeder Air clutch is not engaged (Scallop style feed only) | Check air supply; check MAC valve operation. | |
| Bowl and disc turn; but parts jam | Bowl or prefeeder speed incorrect Incorrect part | Check settings. Correctly set bowl and prefeeder speeds. |
| Incorrect part | Check changeover settings. Verify the feeder is set up for the part to be run. | |
| Tooling or air jets need adjustment | Check air jet positioning, and refer to your direct supplier’s “As-Built Tooling Documentation” | |
| Bowl does not turn | Part Jammed in Feeder | Verify the electric supply to the elevator |
| Bowl does not turn | Part Jammed in Feeder | Verify the electric supply to the elevator |
| Bowl does not turn | Part Jammed in Feeder | Verify the electric supply to the elevator |
| Air clutch is not engaged (Scallop style feed only) | Check air supply; check MAC valve operation. |
* The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Contact
Have a question or need additional information?
Careers
Explore our current job openings.
Contact
Have a question or need additional information?
Careers
Explore our current job openings.