Labelers and Label Applicators

Standard Products

L410A Pressure Sensitive Labeling Applicator

Product Overview

The L410A pressure sensitive labeling applicator is the proven, robust solution designed to meet the demands of expanding labeling requirements and higher production speeds. Durable, industrial-grade construction assures you that the L410A label applicator will provide around-the-clock operation you can depend on. The easy to use operator interface allows for quick changes to label speeds and position. Flexible design features and multiple application options allow you to easily tailor the L410A pressure sensitive label applicator to cover your specific labeling needs.

L410A Labeling Applicator
Labeler Specifications
Labeling Rate (PPM)  Up to 150ppm to 600ppm *
Label Head Speed Up to 3,500”/min (1482mm/sec) *
Accuracy ± 0.02” (±0.5mm)
Controls Programmable Logic Controller
Label Drive Motor High Torque Micro Stepper
Unwind Roll Diameter 14” (376mm) OD x 3” (76mm)
Label Detection Photo Electric
Power Requirements 115VAC, 50/60Hz, 6 Amp or 230VAC, 50/60 Hz, 3 Amp
Environment 41-104˚F (5-40˚C), 25-85% relative humidity

*Dependent upon label and application.

  • Standard Features
  • On board diagnostics
  • Product recipe capabilities
  • On-the-fly label adjustments
  • No tool required label changeover
  • Label head applicator widths in 4″, 6″ and 8″
  • Dual nip roller for less web breakage
  • Streamline footprint
  • Assortment of modules, including Tamp
  • Right-hand and left-hand configurations
  • Coding/inspection accommodations
  • Available Options
  • Tamp-On, Blow-On, Tamp-Blow and Wipe-On modules
  • Swing arm pallet labeler
  • Wipe-On brush accessory kits
  • Harsh environment head
  • Line encoder kit upgrades
  • Label low level sensor & beacon fault upgrades
  • Adjustable stands and machine mount supports
  • Various label applicator accessories: brush, roller, etc.
L410A Specifications
Product Specifications ANSI Metric
A Overall Height- Peeler Tip to Unwind Wheel 41.40″ 1052 mm
B Overall Width – Rewind Wheel to Dancer Arm 24.50″ 622 mm
C Applicator Height 23.30″ 592 mm
D Applicator Width 20.5″ 521 mm
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.

L410A Labeler-Technical Data Sheet