Labeling Applicators - Print & Apply

Standard Products

L3500PA Labeling Applicator


Product Overview

The L3500PA Print & Apply labeler redefines the economics of printer applicators. Available with multiple printer options and a variety of application choices including tamp-on, blow-on and wipe-on, the L3500PA provides you with flexibility to meet all your labeling needs. The robust construction protects key components from the rigors of industrial use. Label speeds are determined by the print engine manufacturer.

L3500PA Print & Apply
Labeler Specifications
Accuracy ± 0.032” (±0.81mm)
Controls PLC based control, HMI Touchscreen Interface
Unwind Roll Diameter 12” (305mm) OD x 3” (76mm)
Product Detection Photo Eye
Machine Interface External Sub D connectors
Air Requirements 80 psi @ 2.2 CFM
Power Requirements 115 or 220 VAC, 50/60Hz, 6 Amp
Environment 41-104˚F (5-40˚C), 25-85% relative humidity
  • Standard Features
  • No tool label roll changeover
  • Rugged construction: solid aluminium front plate, 1″ x 2″ solid steel U-Arm
  • Standard 12″ (305mm) label supply roll
  • HMI touchscreen interface
  • Stainless steel and black anodized construction
  • Available Options
  • Tamp-On, Blow-On, Tamp-Blow and Wipe-On modules
  • Extended length tamp modules (up to 24″)
  • Horizontal positioning device
  • Label low level sensor & beacon fault upgrades
  • Adjustable stands and machine mount supports
L3500PA Print & Apply Specifications
Product Specifications ANSI Metric
A Applicator Width 30.38″ 772 mm
B Overall Width 45.50″ 1156 mm
C Overall Depth 38.40″ 976 mm
D Frame Depth 34.25″ 870 mm
E Stand Height 62.52″ 1588 mm
F Applicator Height 24.15″ 613 mm
G Applicator Depth 21.45″ 545 mm

Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.

L3500PA Labeler-Technical Data Sheet