FT-Series Centrifugal Feeder
Standard ProductsFT-20-RD Centrifugal Feeder
Product Overview
Shibuya Hoppmann’s standard FT-20-RD centrifugal feeder is designed using a rigid disc to feed a variety of products with its unique bowl design. Product is metered into the bowl and brought out to the bowl rim where a series of qualifiers gently orient the part for transfer to various downstream inline devices. This system varies in feed rates and can handle small to medium sized parts. Note: Tooling is not included with the FT-20-RD centrifugal feeder.
Part Number | FT201RLASA |
---|---|
Motor Style | AC |
Motor Voltage | 230 / 460V |
Horsepower | 1 / 5hp |
Total Equipment Weight | 150lbs. / 68kg |
- Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- Available Options
- Polycarbonate covers
- Dual motor drive system
- Washdown motor(s)
- NEMA 1 encased controller
Product Specifications | ANSI | Metric | |
---|---|---|---|
A | Outside Diameter | 27.28″ | 692.9 mm |
B | Overall Frame Height | 24.50″ | 622.3 mm |
C | Bowl Discharge Height * | 15.45″ | 394.7 mm |
D | Bowl Outside Diameter | 25.75″ | 654.0 mm |
E | Bowl Inside Diameter | 20.25″ | 514.0 mm |
F | Rim Width | 2.75″ | 70.0 mm |
G | Bowl Depth | 2.50″ | 64.0 mm |
H | Level Foot Adjustment * | 2.75″ | 70.0mm |
* The leveling foot has a vertical adjustment of ±1.75”, allowing for a height variation between 1.00” and 4.50”. This may alter the discharge height.
Clockwise Square Tooling Frame and Backup Ring – BUCWFT20SU
Counterclockwise Square Tooling Frame and Backup Ring – BUCCFT20SU
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.