FT-Series Centrifugal FeederStandard Products
FT-10-RD Small Parts Feeder
The FT-10-RD centrifugal feeder meets the stringent demands of pharmaceutical, cosmetic and electronics feeding applications. The FT-10-RD small parts feeder is ideally suited for product that requires a high degree of precision. The delivery rate varies from moderate to high speeds depending on part characteristics. The FT-10-RD small parts unscrambler is engineered to interface with prefeeders, accumulating conveyors, labelers and assembly equipment.
|Total Equipment Weight||125 lbs. / 57 kg|
- Unique single drive system
- Ideal for intricate, small parts
- Variable rim speed control
- Polyurethane bowl
- Delrin center disc
- All stainless steel exterior construction
|A||Frame Width and Length||13.50″ x 15.50″||343.0 mm x 394.0 mm|
|B||Overall Height/Discharge Height||14.50″ ± 1″||358.0 mm x 25mm|
|C||Inside Bowl Diameter||10.00″||254.0 mm|
|D||Bowl Rim Width||1.5″||38.1 mm|
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.