FS-Series Centrifugal FeederStandard Products
FS-20 Scallop Feeder
The standard FS-20 scallop feeder is designed to feed and orient bottles and other cylindrical parts with the use of urethane scallops. Parts are radially oriented and gently qualified in the scallop pockets by means of sweeps, wipers, pneumatic and/or electric devices depending on specific product characteristics. Oriented parts are discharged and carried away by various downstream in-line devices. Note: Tooling is not included with this unit.
|Total Equipment Weight||400lbs. / 181kg|
- Standard Features
- All stainless steel exterior construction
- FDA approved ABS vacuum formed disc
- Teflon Hardcoat Anodized aluminum bowl
- Air Clutch
- Hinged polycarbonate cover with safety interlocks
- Backup ring
- Available Options
- Washdown motor(s)
- NEMA 1 encased controller
|A||Outside Diameter||40.00″||1016.0 mm|
|B||Overall Height||42.00″||1067.0 mm|
|C||Bowl Discharge Height||32.25″||819.2 mm|
|D||Bowl Outside Diameter||25.50″||648.0 mm|
|E||Bowl Inside Diameter||20.25″||514.0 mm|
|F||Rim Width||2.63″||67.0 mm|
|G||Bowl Depth||3.36″||85.3 mm|
|H||Level Foot Adjustment||5.00″ ± 2.5″||127.0 ± 64 mm|
*Scallops – please contact Shibuya Hoppmann for more information.
Shibuya Hoppmann Corporation strives to improve its products and reserves the right to change or discontinue specifications and designs shown in this information sheet without notice and without incurring obligation. Revised: 05/18.